logo
 
 


 
CPU Coolers > Cofan Part #: LP 600 Series

LP652 Aluminum LP662 Aluminum LP670 Aluminum LP679 Aluminum LPC662 Copper

Low Profile (20 and 22mm) Active CPU Cooler


PDF Documents Features Compatibility Heat Sink Integrated Fan


 
PDF Documents
  LP-600 Series
  LP652 Aluminum LP662 Aluminum LP670 Aluminum LP679 Aluminum LPC662 Copper
 
Fan
Heat Sink
Assemble Parts
DATA
LP662A LP662B
LP670A LP670B
LP679A LP679B
 


 
Features
COFAN's state-of-the-art aluminum and copper low profile heat sinks are the best performing heat sinks we have seen to date. We believe this extremely low thermal resistance is due to our open fin design, high number of fins, fin thickness, highest CFM fan we could make, (we are also and OEM of fans), and surface flatness of 3/1000 per linear inch.

Our test results showed a thermal resistance as low as .387 for the 60 x 79 size. This is much better than the copper without the weight. Our clip design is also a highly effective method of attachment for two reasons: the wire design allows for less material to be removed and also the dual rocker design which does not "pop out" when subjected to 30G shock and vibration test (per independent testing).

All LP series heat sinks will work on Intel PPGA, FCPGA, and FCPGA2 (Celeron, Coppermine, and Tualitan) CPU's. In addition to having the best performing aluminum extruded cpu coolers in the world, we are also the only CPU cooler manufacturer who has 100K hour fans. Call us and we will email you our MTBF test report. Although our test results show the aluminum to have better performance, we still offer the same design in copper (see part # LPC662).


 
Compatibility
Intel Celeron 300 MHz. - 533 MHz. (PPGA)
533 MHz. - 700 MHz. (FC-PGA)
Pentium III Coppermine 500 MHz. - 1100 MHz. (FC-PGA)
Tualatin 1000 MHz-1400 MHz (FC-PGA2)
AMD K6 166 MHz. - 300 MHz.


 
Heat Sink
Alloy Extrusion 6063 T5 Aluminum
Pedestal Flatness 3/1000 per linear inch
Mechanical Mounting Wire Spring Clip
Interface Material Chomerics T-725


 
Integrated Fan
  Size (LxWxH):
  50 x 10mm 60 x 10mm 60 x 12mm
COFAN PART D5010A12H FP610HH12CII D6012M12A
Air Flow: 8.62 CFM @5100 RPM 20.4 @4800 RPM 18 CFM @ 4200 RPM
Acoustic Noise: 24 dBA 36.1 dBA 32.8 dBA
Input Power: 12 VDC, 0.11 Amp 12 VDC, 0.30 Amp 12 VDC, 0.15 Amp
Connector 3 Pin Molex 22-010-3037 3 Pin Molex 22-01-3037 3 Pin Molex 22-01-3037
Tachometer Sensor Output: TTL Signal, 2 Pulses/Rev TTL Signal, 2 Pulses/Rev TTL Signal, 2 Pulses/Rev
MTBF: 100,000 Hrs 70,000 Hrs 100,000 Hrs


 
 
Terms of Use Copyright © 1994-2008 Cofan USA, Inc. All Rights Reserved. Back to Top